19 ” model

– 16mm thick raw DM board.

– For monitors up to 19 “in 4: 3 or 5: 4 format:

• Hollow available for image: 35 x 49 cm (height x width).
• Internal hollow monitor, keeping the image centered: 40 x 49 cm (height x width).

– For 2 players. Holes for each one:

• 6 + 1 in control panel of 28 (or 30) mm.
• 1 + 1 on the front panel of 28 (or 30) and 16 mm.

– Holes:

• 2 holes for 2 “speakers.
• VESA 75 and VESA 100 holes to hold the monitor.
• Rear hole for lock.
• Rear hole for IEC connector C14.
• Rear vent.

– Additional components:

• 4 brackets for monitor support.
• 4 legs.
• 1 piano hinge.
• Necessary screws.

– Assembly:

• Bolted with lag screws between lateral and transverse tables.
• Holes with holes in sides, countersunk.

– Dimensions: 52.2 x 43.5 x 60 cm (width x depth x height).

– Assembly manual included.

24″ Model

– 16mm thick raw DM board.

– For monitors up to 24 “with 16: 9 or 16:10 format:

• Hollow available for image: 35 x 49 cm (height x width).
• Internal hollow monitor, keeping the image centered: 40 x 59 cm (height x width).

– For 2 players. Holes for each one:

• 6 + 1 in control panel of 28 (or 30) mm
• 1 + 1 on the front panel of 28 (or 30) and 16 mm.

– – Holes:

• 2 holes for 2 “speakers.
• VESA 75 and VESA 100 holes to hold the monitor.
• Rear hole for lock.
• Rear hole for IEC connector C14.
• Rear vent.

– Additional components:

• 4 brackets for monitor support.
• 4 legs.
• 1 piano hinge.
• Necessary screws.

– Assembly:

• Bolted with lag screws between lateral and transverse tables.
• Holes with holes in sides, countersunk.

– Dimensions: 62.2 x 43.5 x 60 cm (width x depth x height).

– Assembly manual included.

Configurations

– Choose between 28mm or 30mm holes.

– Option that the 4 holes of the front panel be large; of 28mm or 30mm.

– Possibility of including the 3mm methacrylate, cut to size, for:

• Control panel with its holes.
• Monitor.
• Marquee

19″ Model

– 16mm thick raw DM board.

– Compatible with Bartop TALENTEC 19 “

– Additional components:

• 4 legs.
• necessary screws.

– Assembly:

• Bolted with lag screws between lateral and transverse tables.
• Holes with holes in sides, countersunk.

– Dimensions: 52.2 x 43.5 x 85 cm (width x depth x height).

– Assembly manual included.

24″ Model

– 16mm thick raw DM board.

– Compatible with Bartop TALENTEC 24 “.

– Additional components:

• 4 legs.
• necessary screws.

– Assembly:

• Bolted with lag screws between lateral and transverse tables.
• Holes with holes in sides, countersunk.

– Dimensions: 62.2 x 43.5 x 85 cm (width x depth x height).

– Assembly manual included.

Configurations

– Choose between open pedestal or with door..

– Possibility of including one or two shelves.